Theipi e thibelang mocheso
Theipi ea Teflon e phahameng ea mocheso
Theipi ea mocheso o phahameng oa Teflon e na le litšobotsi tse latelang:
1. E sa khomareleng;
2. Ho hanyetsa mocheso o phahameng le o tlaase, tšebeliso ea nako e telele ea sehlahisoa e ka mamella mocheso oa 260 ° C;
3. Ho hanyetsa ho bola;
4. Khohlano e tlase le ho hanyetsa ho apara;
5. Ho hanyetsa mongobo le ho kenya letsoho ho phahameng;
Botenya ba lihlahisoa tse tloaelehileng ke 0.08MM, 0.13MM le 0.18MM, 'me mebala e sootho, e tšoeu ebile e tala.
Theipi ea mocheso o phahameng oa Teflon e sebelisoa haholo bakeng sa:
1. Insulation cladding bakeng sa indasteri ea terata le cable;
2. Insulation linening bakeng sa indasteri ea electro-oksijene;
3. Sekoaelo sa bokaholimo ba rolara ea tanka ea polokelo le lesela la bokaholimo ba likhohlano tsa seporo sa tataiso li ka hokelloa ka kotloloho libakeng tse fapaneng tse kholo tse bataletseng le libaka tse kobehileng tse tloaelehileng (joalo ka lirolara).Ts'ebetso e bonolo, 'me ha e hloke lisebelisoa tsa setsebi, mekhoa e khethehileng le lipalangoang bakeng sa ho fafatsa thepa ea PTFE.Lithibelo tse kang ho sebetsa lifekthering tsa litsebi tsa ho fafatsa;
4. E sebelisoa ka masela, lijo, meriana, ho lokisa lehong le mafapha a mang e le thepa e sireletsang mocheso o phahameng;
5. Mechini e hatisang le ho paka ka mebala, metjhini e lohang ea polasetiki le metjhini e takang ka terata, ho omisa ka microwave, mabanta a fapaneng a tsamaisang mekotla le metjhini e fapaneng ea ho etsa mekotla ka har'a indasteri ea ho aena, ho tiisa le ho hatisa, le mochini o tiisang o chesang o koala sefahleho sa mochini o tiisang; etc.
| Mohlala | Substrate | Mmala | Lintho tse bonahalang | Botenya (MM) | Boholo bo tloaelehileng | Ho khomarela (N/25mm) | Elongation(%) | Ho hanyetsa mocheso (℃) |
| 802-80 | Theipi e phahameng ea mocheso | E tšoeu, e mosehla o khanyang | Rabara | 0.14 | 5-1020MM * 50M | 8 | 8 | 80 |
| 802-12 | Theipi e phahameng ea mocheso | E tšoeu, e mosehla o khanyang | Rabara | 0.14 | 5-1020MM * 50M | 11.8 | 7 | 120 |
| 802-14 | Theipi e phahameng ea mocheso | E tšoeu, e mosehla o khanyang | Rabara | 0.14 | 5-1020MM * 50M | 8.3 | 8 | 140 |
| 802-18 | Theipi e phahameng ea mocheso | E tšoeu, e mosehla o khanyang | Rabara | 0.16 | 5-1020MM * 50M | 8.5 | 10 | 180 |
Theipi e phahameng ea mocheso oa PET e tala
Theipi e phahameng ea mocheso oa PET e na le litšobotsi tse latelang:
1. E babatsehang qalong tack le adhesion;
2. Ha ho na masala a sekhomaretsi, ha ho na ho sotha ka bohale, ha ho na ho oela ka mor'a ho baka;
3. Ho hanyetsa ho qhibiliha;
4. Acid le alkali ho hanyetsa;
5. Ho hanyetsa mocheso oa nako e telele oa 200 ° C.
Botenya ba mocheso o phahameng oa tepi e tala ea PET ke: 0.055mm, 0.060mm, 0.070mm, 0.080mm, 0.10mm, 0.12mm, 0.13mm.Mebala ke: botala bo khanyang, joang bo botala, bo botala bo lefifi, bo botala bo lefifi, bo mosehla, boputsoa, boputsoa ba leholimo, botsho, bo bonaletsang (mebala e ikhethileng).
Theipi e tala ea PET e sebelisoa haholo ho:
1. Ho fafatsa ka mocheso o phahameng le ho koahela phofo bakeng sa chassis le linoelo tse futhumetseng;
2. Boto ea PCB e sireletsang mocheso o phahameng;
3. Lesenke la ho baka holim'a boto ea PCB, tšireletso e entsoeng ka khauta;
4. Ho tlatsa le ho sireletsa sekhomaretsi sa mocheso o phahameng bakeng sa li-block tsa matrix tsa matheba a LED, li-tubes tsa digital, le liphanele tsa motlakase tsa LED;
Likarolo tsa sehlahisoa
Ts'ebetso e Ntle ho Matla a Khomaretsang, e Thibela Mocheso o Phahameng, Ho hanyetsa ho qhibiliha, Matla a Matla a Ho Tšoara, Ha ho Sekhomaretsi sa Masala a Le letšehali.
1.Substrate Material: Filimi ea Polyester
2. Sekhomaretsi: Silicone
