Aluminum foil tape application precautions

Aluminum foil tape is the main raw and auxiliary material for refrigerators and freezer factories, and is also an essential material for the insulation material distribution department. It cooperates with the lamination of all aluminum foil composite materials, the sealing of insulation nail puncture points, and the repair of damaged parts. Aluminum foil tape is widely used in refrigerators, air conditioners, automobiles, petrochemicals, bridges, hotels, electronics and other industries.

The application characteristics of aluminum foil tape are as follows:

1. Aluminum foil tape has strong corrosion resistance, and there is a special anti-corrosion coating on the surface, which greatly enhances its corrosion resistance. After using polyethylene hot air pasting, there is no need to use a composite adhesive to eliminate the risk of rust and mold on the aluminum foil surface caused by adhesive residue.
2. The aluminum foil tape is directly hot-pressed, eliminating the need for lamination and saving the cost of lamination.
3. The water vapor permeability is reduced, which enhances the barrier effect of water vapor;
4. Aluminum foil tape has high tensile strength and smooth surface. Therefore, aluminum foil tape is suitable for online placement in glass wool factories, rock wool factories, mineral wool factories and other manufacturers.
5. The veneer is flatter, which reduces the possibility of surface damage to the aluminum foil: Because the fiberglass cloth of the aluminum foil tape is made of thinner material and the polyethylene layer is thicker, the veneer is flatter and less likely to be scratched.Precautions for operating aluminum foil tape:
   1. The objects adhered to the aluminum foil tape must be kept dry and clean, otherwise the adhesive effect of the tape will be affected;
   2. Since aluminum foil tape has pressure-sensitive properties, the tape can adhere well to the object to be adhered;
   3. Tapes that do not have UV protection properties should be kept away from sunlight to avoid residual glue;
   4. Under different circumstances, using different sticky materials, the same tape will have different effects; such as PVC sheets. Metal products, plastic products, etc.